MOST KIT CONTENTS:
QTY: 2 Ballast w/wiring
QTY: two HID Lights w/wiring
QTY: 2 Mounting Hardware
INSTALLATION Guidelines:
1. Turn off the car to get rid of the power provide to prevent any shock or injury. Disconnect battery to additional keep away from shock.
two. Open the hood and be sure headlights and surrounding perform region beneath the hood are cool and secure to function about.
three. Take away the headlight assembly or remove any components that interfere with unplugging the bulb so you might have quick access for the rear in the headlight assembly.
4. Unplug the current halogen bulb and remove from the headlight assembly. Pay interest to where the red and black wires are for the existing energy supply/plug. You can make use of the exact same plug in for your HID bulbs. The headlight assembly may possibly have a latch that holds the bulb in or they may screw out about a ¼ turn counter clockwise so ensure that you don't break the headlight assembly when removing.
5. Meticulously eliminate the plastic cover guarding the HID bulb. Don't TOUCH THE GLASS Part of THE BULB WITH ANY SURFACE In particular YOU HANDS. Take your HID bulb and insert it into the TunersDepot.com. Ensure that you latch within the HID bulb or screw it ¼ turn clockwise to secure it in spot exactly where the original halogen bulb was.
REMINDER WARNING: Spend close consideration during installation. Don't touch the glass a part of the bulbs to any surface such as your fingers throughout installation as you'll run the threat of damaging the bulb. Wearing gloves is recommended in the course of installation. When the bulb is touched together with the fingers you may use some rubbing alcohol as well as a clean cloth to get rid of any spots or blotches around the bulb.
six. Just after installation on the HID bulb into the headlight assembly install the headlight assembly back into its original position around the car or truck or move for the subsequent step if the headlight assembly was never ever removed.
7. All power plugs come with climate seals and are made to plug in one particular way for ease of installation. Get started by plugging every little thing together and acquiring a secure location to put the ballast.
eight. Right after all the climate seal plug wires are plugged into one another you'll make use of the wires coming from the HID bulb to plug them in to the headlight assembly's original energy supply/plug. You'll need to plug the red and black wire into the exact same spot around the original energy supply/plug for the headlight assembly.
9. After the HID lights are plugged into the original power provide you are able to restore energy towards the vehicle. Locate a safe place to fasten the ballast under the hood. You are able to use zip ties, screws and bracket or some Velcro. Endeavor to location the ballast within a dry location as to not expose it to much more weather than is required. Hold it as far away in the engine to avoid overheating the ballast and damaging it.
ten. Turn on the headlights. If they turn on then you definitely are carried out and you can finish by reinstalling the headlight assembly or any parts that may have been removed for installation.
11. In case your headlights never turn you'll want to turn off the power supply to the automobile and switch the plugs in the HID into distinct energy slots around the original power supply/plug. Attempt once more till they turn on.
CAUTION Through & Right after INSTALLATION
1. We recommend that a professional technician or shop install these HID lights.
2. Wear gloves throughout installation to protect your hands.
three. Ensure that the HID bulb doesn't come into contact with any surface which includes your fingers.
four. When installing and adjusting the HID bulb inside the headlight assembly be confident the bulb isn't touching the inner shield (if applicable) make sure to leave a 4-6mm gap.
five. Make sure you check all connections throughout and soon after installation to ensure a proper connection. Check the power supply and be sure it is correct. A wrong connection together with the HID light for the original energy source will keep them from turning on.
6. Be sure that all wires and connections are free of any high tension. When the wires are pulled too tight they will age prematurely.
7. Ensure to find a protected and safe spot for the ballast that is as far away from any weather as possible. Also hold it as far away in the engine to prevent any overheating in the ballast which will cause malfunctions and possibly permanent damage.
eight. Don't touch the bulbs following turning them on. They get very hot. If service is required on the bulbs allow 20-30 minutes for the bulbs to cool down.
9. Usually do not stare at the light emitted in the HID light.
10. Please note that HID kits are for off road and exhibition use only and are not street legal. Original equipment HID bulbs must be replaced with same specification as required in your owners manual to maintain DOT standards. Please review and observe all laws when using, installing, or purchasing HID kits.
